To install your DVD rewrite gather some information from your PC to install it.
First we need to know what hardware’s are already fitted to PC so it will help at the end of installation in order to check that installation is well. Windows Hardware Manager will display a list of the hardware but not how it has been configured. Now follow the steps to install DVD rewrite:
1. Right click on My Computer and select – Properties
2. Select the Hardware Tab and Device Manager.
After selecting the Hardware Tab and Device manager make a note of the DRIVES you have fitted to your computer and their names. If your computer shows that there are four drives (2-Hard disks and 2 CD/DVD-Rom’s) you will not be able to add any more drives. You will be able to identify the drives from this list when you open the computer case.
The CD drive contains three ports witch is the IDE port, the power port and audio port. CD-ROM is available in either internal or external models. Before you configure DVD ROM, You have to shut down Computer and unplug the power supply cable from back of your computer. Than unplug the rest of the wires from the back of the computer. Unscrew all screw from the back of the components base, than open the base of the cover. Every drive has specific area to locate. Put down the new drive on the appropriate area than secure the drive to the casing with screws provided
If you fitted screw with drive to base than its holds a drive in specific location.
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment